新乡森科机械有限公司是生产过滤设备的厂家,其中板框纸板过滤机和圆盘硅藻土过滤机是公司的拳头产品,特别是公司生产的板框纸板过滤机物美价廉,经常出口到东南亚国家,,,

2024-07-02  来自: 新乡市森科机械有限公司刘红星 浏览次数:14

板框纸板过滤机

板框纸板过滤机

板框纸板过滤机

新乡森科机械有限公司是生产过滤三包的厂家,其中板框纸板过滤机圆盘硅藻土过滤机是公司的拳头产品,特别是公司生产的板框纸板过滤机物美价廉,经常出口到东南亚等家, 为了方便客户了解板框纸板过滤机的性能参数,我公司将带有中英文的资料发给大家,共广大客户浏览学习。

Technical part

1.1设备概述Equipment overview

不锈钢板框式精密过滤机从德国引进制造技术生产,是目前国内应用多也的澄清设备;以精滤或纸板为过滤介质,配以不同型号的精滤纸板,可以对各种酒、饮料、食品、医药、化工等行业的液态制品进行精度不同的澄清过滤,能使直径为0.20.5um的菌体及固体微粒100%截留,从而可取代巴氏杀菌旧工艺,更好地保留原液的特性。

Stainless steel plate and frame precision filter from Germany to introduce manufacturing technology production, is the most application of the most reliable clarification, sterilization equipment in china; Fine filter or sterilization cardboard as a filter medium, with different types of fine filter or sterilization cardboard, can be a variety of wine, beverage, food, medicine, chemical and other industries of liquid products for different clarification or sterilization filter, and can make the diameter of 0.2 ~ 0.5um of bacteria and solid particles 100% retention, which can replace the pasteurization of the old process, to better retain the characteristics of the liquid.

本设备与液体接触的部件均为316不锈钢材质,全部管阀件无死角。

The parts of the equipment in contact with the liquid are 316 stainless steel, all pipe valves without dead ends.

设备操作简单、维护方便、过滤质量稳定可靠等优点。

The device is simple, easy to maintain, stable and reliable filter quality and so on.

1.2设备基本技术特性

Basic technical characteristics of equipment

 

参考流量(hL/h)(果酒)

Reference  rangehL/h)(fruit wine

600×600板框精滤

600×600  Frame fine filter

 

澄清clarification

Sterilization

100-200

70-115

滤板数量(片)

Number  of  filter platessheet

145

端板数量(片)

Number  of  end platessheet

2

过滤面积(m2

Filter  aream2

50

最高工作压力

Maximum  working  pressure

0.6MPa

过滤压力

Filter pressure

0.2-0.6Mpa

配用纸板规格(长×宽×厚)

cardboard specifications (length × width × thickness)

600×600X3.5

过滤精度(浊度)

Filtration accuracy (turbidity)                                                    

0.3EBC

吸氧量

Oxygen absorption

0.02mg/L

CO2降低值

CO2 reduction

0.02%

外形尺寸(mm)(长×宽×高)

Dimensionsmm)((length × width × thickness)

4260×1020×1225

重量(kg

weightkg

3550

1.3订货要求Ordering requirements

1.3.1本机为147片;与物料接触部分为304材质,其余外露部分为304不锈钢材质;接汁盘为304材质。

The machine has 147 sheets; and material contact part and the juice tray is 304 material, the rest of the exposed part is 304stainless steel.

1.3.2压紧装置为全自动液压压紧方式。过滤机工作压力0.6MPa

The pressing device is fully automatic hydraulic compression. Filter the maximum working pressure 0.6MPa.

1.3.3连接进出口管径为DN65管路焊接采用管内充氩气的单面双成形工艺,有效的保证了内外焊缝的质量,易于清洗和杀菌,连接方式为法兰连接。

Connected to the import and export diameter DN65,pipeline welding using the tube filled with argon single-sided double forming process, effectively guarantee the quality of the weld inside and outside, easy to clean and sterilization, the connection for the flange connection.

1.3.4设备选用 西安仪表厂生产的YPF-100-304不锈钢压力表,接触液体材料为304不锈钢材质。质量完全符合GMP/FDA规范要求。

Equipment selection  Xi'an Instrument factory production YPF-100-304 stainless steel pressure gauge, contact the liquid material for 304 stainless steel. The Quality is fully compliant with GMP / FDA regulations.

1.3.5过滤机板框不得留有死角和毛刺。过滤板框的焊接采用工装保证,大小均匀一致。在机架上的过滤板组每两块间外形尺寸偏差不超过0.5mm,每10块间误差≤2mm。

The filter plate should not have dead ends and burrs. The welding of the filter plate and frame is guaranteed by tooling, and the size is uniform. The filter plate group on the rack each two pieces of the size deviation of not more than 0.5mm, the error between every ten plates  less than 2mm.

1.3.6视镜玻璃为硼硅玻璃视镜,带304不锈钢防护罩。耐压0.8MPa,耐高温120度。

Mirror Glasses are borosilicate glass mirrors with 304 stainless steel shields. Pressure 0.8MPa, high temperature 120 degrees.

1.3.7过滤机所有和物料接触的密封圈,采用食品级硅橡胶密封,材质符合GMP标准,并提供材质报告书。

Filter with all the materials in contact with the sealing ring, the use of food grade silicone rubber seal, the material in line with GMP standards, and provide material report.

1.3.8电气部分元件均采用施耐德或西门子电器元件。

Electrical components are used Schneider electrical components.

1.3.9液压元件采用台湾华德液压元件。

Hydraulic components using Taiwan Huade hydraulic components.

1.3.10地脚盘为304不锈钢材质

The foot plate is made of 304 stainless steel.

1.4产品制造检验、验收执行标准

Product manufacturing inspection and acceptance standards

1、中华人民共和国行业标准QB/T15881-15883-92、轻工机械焊接件、切削加工件、装配通用技术条件。

People's Republic of China industry standard QB / T1588,1-1588,3-92, light industrial machinery parts welding, cutting member, assembly general technical conditions.

2、中华人民共和国行业标准JB/T5286-91纸板、硅藻土板框式过滤机

People's Republic of China industry standard JB / T5286-91 cardboard, diatomaceous earth plate and frame filter.

3、德国DIN11851DIN11854等标准。

Germany DIN11851, DIN11854 and other standards.